Keʻa Hatch Cross

Hoakaka
Pili ʻo TMTeck cross cross hatch cutter e hoʻoholo i ka hoʻopili ʻana o nā uhi ʻokanika e ka hatching. Hoʻonohonoho ʻia kēia mea hana no ka loiloi ʻana i ke kūʻē ʻana o ka pena a i ʻole nā ​​uhi pili i ka hoʻokaʻawale ʻana mai nā substrates ke ʻoki ʻia kahi oattern lattice ʻākau i loko o ka uhi, komo ma o ka substrate.
Kūlike ka Cross Hatch Cutters me nā koi o: BS 3900 E6; BS / EN ISO 2409; ASTM D 3359; GB / T 9286,, ʻo ia ka hoʻokele waiwai.
Nā Papahana Huahana Nui:
1. ʻEono mau pahi ʻaoʻao e hana ana: Ke ʻaʻole lawa ka maka o ka pahi, hiki i nā mea hoʻohana ke hoʻokuʻu i ka nut type boat a me ka ʻūlū paʻi luna e hoʻololi i ka lau.
2.Multi-ʻoki pahi spacing: 1mm / 2mm / 3mm
3. ʻO ka helu o nā square: 25squares / 100squares
Nā ʻenehana kikoʻī nui:

<td ” width=”115″>Working blade <td ” width=”144″>Width of blade end <td ” width=”96″>Hardness <td ” width=”228″>Coat thickness<td ” width=”115″>1mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard <td ” width=”228″>0-60μm<td ” width=”115″>1mm  11 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard <td ” width=”228″>0-60μm       (0-50μm ASTM)<td ” width=”115″>2mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>61-120μm    (50-125μm ASTM)<td ” width=”115″>2mm 11 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>61-120μm     (50-125μm ASTM)<td ” width=”115″>3mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>121-250μm

Standard Package:
Cross Hatch Cutter:1pcs
Magnifier: 1pcs
Brush:1 pcs
Gummed tape(3M):1pcs